“Cash for Caulkers” is nearly here. Last month the House of Representatives passed H.R. 5019 – also known as the Home Star Energy Retrofit Act of 2010 or “Cash for Caulkers” – to kick-start construction, create jobs and cut back carbon emissions. While the bill still needs to clear the Senate, supporters predict it will pass this summer.

This is great news for homeowners and contractors alike. The bill provisions $6 billion for energy-efficient or “green” retrofits. It is expected to fund renovations for 3 million families, create 168,000 new jobs and save consumers $9.2 billion on energy bills over the next 10 years.

But in order to cash in on upcoming rebates, homeowners and contractors will need to do their homework. There are 13 types of retrofits eligible for funding. Each retrofit has unique eligibility requirements and set rebate amounts. You can read the full text here.

Who is Eligible and How to Qualify?

The Home Star bill offers two rebate programs, the “Silver Star” program and “Gold Star” program. Here are details for each:

Silver Star – Unless another amount is specified in the “Rebate Amount” column above, homeowners will receive a $1,000 rebate for each retrofit listed in our table. The maximum amount of rebates paid out will be $3,000 or 50% of the total cost, whichever is lower. For example, if a homeowner spends a total of $4,000 on eligible retrofits, they will get $2,000 or 50% back as a rebate. If they spend $8,000 on eligible retrofits, they would only receive $3,000 in rebates instead of $4,000 (which would be 50% of the cost).

We made it really easy to wade through the legalese. Here is a table that breaks down the 13 retrofits of the bill, along with the requirements and rebate amount for each. In addition to the requirements we listed, each retrofit must comply with Building Performance Institute (BPI) standards or other procedures to be approved by the Secretary of Energy.

Gold Star – To qualify for the Gold Star program, homeowners must reduce their total home energy consumption by 20%. A $3,000 rebate will be rewarded for this reduction. Homeowners can receive an additional $1,000 for each additional 5% reduction, up to a total rebate of $8,000 or 50% of the total retrofit cost. Rebates may be provided for any of the retrofits listed under the Silver Star program, or for any other energy-saving measure, including: home energy management systems, high-efficiency appliances, highly reflective roofing, awnings, canopies, and similar external fenestration (window) attachments, automatic boiler water temperature controllers, energy-efficient wood products, insulated vinyl siding, and mechanical air circulation and heat exchangers in a passive-solar home.

The Home Star bill also includes rebates for do-it-yourself (DIY) homeowners that are confident in taking on the renovations themselves. DIY’ers can get up to $250 in rebates for products purchased without installation service. This rebate is limited to attic insulation, crawl space insulation and/or air-sealing retrofits.

Seal Your House Envelope and Improve Insulation

Before carrying out any serious retrofit, homeowners need to weatherize and seal their house “envelope.” The envelope includes outer walls, windows, doors, floors and the ceiling. If the house is not properly sealed and insulated, then subsequent HVAC retrofits won’t be as effective.

So how much does it cost to seal all the air leaks in a home? Prices will obviously vary based on where you live, how big your property is and the scope of the retrofit. But it will likely cost a few thousand dollars to hire a contractor for this type of renovation. In this example from the New York Times, the author spent $3,760 for insulating and sealing the envelope of his 1,200 square foot home.

How much can homeowners expect to save? The Environmental Protection Agency (EPA) estimates that homeowners can save 20% on heating and cooling costs by sealing leaks and adding insulation. In New York – one of the most expensive places to heat a home with an average annual cost of $1,513 – this would be a yearly savings of $300 just for heating.

Continuing with the example from the New York Times, the Silver Star program would provide $1,880 (50%) in rebates for their retrofit. At an annual savings rate of $300, the renovation would pay for itself in six years (or less if you include cost savings from reduced air conditioning bills).

Repair and Replace Leaky Ducts

Duct replacement and sealing is eligible for funding under the Home Star bill. Many homeowners will want to outsource this project to a qualified HVAC contractor. Contractors have equipment to detect leaks that otherwise may not be immediately visible. They also have methods to seal ducts that are inaccessible. For example, by spraying an adhesive or sealant through the duct work.

Replacing and sealing ducts can also be a DIY project, especially when ducts can be easily accessed in an attic or basement. Leaks should be sealed with mastic sealant or metal tape (not duct tape), then insulated to reduce heat loss and to further improve efficiency. The Lawrence Berkeley National Laboratory has an excellent guide on how to seal and insulate ducts.

Upgrade Your Furnace and Water Heater

Heating is the largest energy expense in homes, according to the American Council for an Energy-Efficient Economy (ACEEE). In colder parts of the country, it makes up 30 to 50% of annual energy bills. So improving the heating efficiency of your home will have the biggest impact on lowering your energy costs. Sealing air leaks is a good start, but replacing your heating system could provide real leverage towards cost savings.

If your furnace or boiler was purchased before 1990, then it is time to consider an upgrade. Modern furnaces are much more efficient than those that are older than 20 years. You can use rebates from the Home Star bill to replace your furnace, but you will need to meet their guidelines:

Water heaters are typically the second largest energy users after home heating and cooling systems. Replacing convention oil-fired water heaters with high-efficiency gas or electric heaters can save homeowners thousands of dollars over a 10 to 15 year period. The Home Star bill includes a variety of replacement options eligible for rebates.

Additional Financing Resources

With other legislation in the queue, it might take weeks or months to hear the Senate’s final decision on the Home Star bill. In the meantime, homeowners can receive funding from other sources to pay for green renovations. The federal government, state governments, local municipalities and even utility companies offer several options.

For example, homeowners can still receive a federal tax credit for 30% of the cost of energy-efficient products (up to a total credit of $1,500). This includes the purchase of central air conditioning systems (both the product and installation), electric heat pumps, furnaces and boilers, and whole-house ventilation fans. Visit the US Department of Energy Energy Savers website for more information.

read full article

According to both versions of the legislation, the Silver Star Program will offer rebates, in varying amounts up to $3,000 per home, awarded to participating contractors and vendors, who perform qualifying energy saving improvements. That means if a homeowner hires a contractor, the contractor will float the value of the rebate as a discount to you. They will then be paid by the rebate aggregator.

However, you can do some installations yourself. The press release for the Senate version says consumers can get “between $250 and $1500 in ‘point-of-sale’ rebates” for insulation, air sealing, and — of course — caulk.

The Gold Star Program offers retrofits that rebate up to $8,000 to contractors and vendors for retrofits that achieve home energy savings determined by a comparison of the simulated energy consumption of the home before and after the retrofit. Gold Star rebates to only be offered by contractors accredited by the Building Performance Institute. And it also includes similar language to the House version that defines a “certified workforce” as one where all employees performing installation work are certified by NATE, BPI, LIUNA, or HBI.

read full article